Metaldye Black 2LW

Metaldye Black 2LW produces a Blue-Black color. At medium concentrations it is used for Blue-Grey and Midnight Blue shades.




Physical appearance: Black to dark grey powder
Chemical description: Metalized azo dyes
Light fastness: 8+
Weather fastness: Excellent
Heat fastness: Moderate


Applicable condition are as:


Anodic coating thickness: 5 to 25 microns
Concentration: 1 - 10 g/l
pH range: 4.2 - 4.8
Buffering: Sodium Acetate or Acetic Acid
Dye bath temperature: 55° - 60° C.
Immersion time: 5 - 20 minutes




The dyed oxide film must be properly sealed properly using a hot sealing product, from ALFISEAL products range, for best result.

Other Recommendation:

1) Ammonium compounds shall not be used for controlling of the pH or to buffer dye bath solution.

2) The presence of ammonium compounds in the sealing solution may cause leaching and loss of color.

3) Use sodium acetate for dye buffer.

4) Adequate care to be taken for proper rinsing to control drag-in for optimum tank life.

5) Dye may be dissolved separately outside the dye bath. Use demineralized water for better dye bath stability.

6)  The life of dye bath is reduced by water containing ammonium.


Richiedi Campionatura


Torna indietro