Metaldye Brown A2RL

Metaldye Brown A2RL is a dye in powder form and gives copper shade on anodized aluminum, It has good fastness to light, Weather.

 

CHEMICAL PROPERTIES:

 

Physical Form: Dry Powder
Appearance: Dark Brown Powder
Chemical Class: Metallized Azo dye
Light fastness: Good
Heat fastness: Good

 

ANODIZING RECOMMENDATION:
Applicable condition are as:

 

Coating thickness: 12 - 25  microns
Concentration: 4 - 5 g/l
Temperatures: 55° - 60° C
pH range: 5.5 +- 0.5
Buffering: the bath must be buffered with 8 g/l sodium acetate tri hydrate, 0.4 ml/l acetic acid for pH 5.5
Time: 10 - 15 minutes
Water Quality: preferably de–ionized

 

SEALING:

 

The dyed oxide film must be properly sealed properly using a hot sealing product, from ALFISEAL products range, for best result.

Other Recommendation:

1) Ammonium compounds shall not be used for controlling of the pH or to buffer dye bath solution.

2) The presence of ammonium compounds in the sealing solution may cause leaching and loss of color.

3) Use sodium acetate for dye buffer.

4) Adequate care to be taken for proper rinsing to control drag-in for optimum tank life.

5) Dye may be dissolved separately outside the dye bath. Use demineralized water for better dye bath stability.

6)  The life of dye bath is reduced by water containing ammonium.

 

Richiedi Campionatura

 

Torna indietro

Contatti

  • Indirizzo:  Via Francesco Perlini - Località Albaron,
    37047 San Bonifacio (VR)

  • Tel.: +39 045 981 9788

  • Fax: +39 045 981 9780

  • E-Mail: info@alufinish.it

Estrazione premi